| Housing
for interior installation of standard devices, built as a modular
system conforming to standards.
|
Device
racks made of: hollow aluminium section with two chambers
aluminium die-cast corner connectors (Utility Model Protection
No. G 89 03 169.5) |
|
Panels
double shelled, 20 mm thick, made of galvanised steel
sheet |
|
Sheet
thickness: 1.00 mm - 1,25 mm (depending on size of
unit) |
|
Insulation
of incombustible, noise- and heat-blocking spun-glass
mats |
Thanks to the two-chamber
system, temperature equalisation from outside to inside is
delayed, so that condensation is almost completely excluded.
Air conditioning unit and ventilation equipment is built according
to the kit system and can be produced in any desired combination.
Housings consisting
of a device mounting frame made of special hollow aluminium
sections as well as aluminium die-cast corner connectors.
Side pieces are screwed
in the inner section chamber so that no fixing elements extend
into the device. The interiors of the devices are completely
smooth.
Wall thickness 20 mm
Insulation rating K = 1,25 W/m2K
Mean sound insulation rating Rw = 30 dB
according to DIN 52210
Having a modular construction, the device is easy to assemble
and dismantle for shipping and handling. If desired, housings
can be made to be fully disassembled.
Air volume: 500 - 18.000 m³/h
|
