Box Fans

Casing

The housing consists of a frame made of an extruded aluminium profile with 2 chambers and plastic edges, as well as double-skinned, 20 mm thick panels made of galvanised steel sheet metal with insulation made of non-combustible, sound and heat-insulated glass wool mats. As standard, one casing wall is left open opposite the impeller. EC Unoboxes are suitable for outdoor installation with appropriate accessories.

Impellers

Backward curved high-performance impellers of aluminium are used. The impellers are mounted directly on the rotors of the external rotor motors and are dynamically balanced on two levels with the rotor according to quality level G 2,5 / G 6,3 as per DIN ISO 21940-11.

Electrical connection

The electrical connection for size 50 is done on the lead-out terminal box, from size 67 directly at the motor terminal space (cable routing provided). Integrated motor protection is indicated via an alarm relay. In the “open loop” (standard) model, the speed is continuously provided by a 0-10V signal or a potentiometer (accessory). 

Downloads

Casing

The housing consists of a frame made of an extruded aluminium profile with 2 chambers and plastic edges as well as double-skinned, 20 mm thick panels made of galvanised steel sheet metal with insulation made up of non-combustible, sound and heat-insulated glass wool mats. As standard, one casing wall is left open. Unoboxes are suitable for outdoor installation with appropriate accessories.

Impellers

Unoboxes up to size 450 have backward curved centrifugal impellers made of plastic with galvanised steel support plates. Fans with a size 500 and larger have backward curved high-performance impellers made of aluminium. The impellers are mounted directly on the rotors of the external rotor motors and are dynamically balanced on two levels with the rotor according to quality level G 2,5 / G 6,3 as per DIN ISO 21940-11.

Electrical connection

The terminal box is affixed to the motor housing and can be supplied with flying leads on request.

Direction of rotation

The direction of rotation of the impellers is standard clockwise rotation (seen from the suction side). Counter-clockwise operation will cause overload damage to the motor.

Downloads

Casing

The flexible and compact EC Unoboxes ME are designed to handle air volumes with higher temperatures. A removable service door, an integrated drip pan with condensation drain nozzle, plus special sealing lips are included. The housing supporting frames are double chamber aluminum profiles with corners made of plastic and double skinned (20 mm) galvanized sheet steel panels insulated with non-inflammable, noise and temperature insulating fibreglass mats. Optionally, the outlet side (at the top or the side) can be selected. A changing of the air outlet and side panel at the installation site is possible at any time by setting of the flexible panels.

Impellers

Backward curved high-performance impellers made of aluminium are used. The impellers together with the impeller hub are dynamically balanced on two levels with the rotor according to quality level G 2,5 / G 6,3 as per DIN ISO 21940-11.

Electrical connection

The integrated motor protection is signaled via alarm relay. The electrical connection takes place on the preassembled isolator switch in the housing. In the version „open-loop control“(standard) the speed is adjusted via 0-10V Signal or a potentiometer (accessory). The connection hereto takes place directly at the EC-Controller inside the EC Unobox ME.

Downloads

Casing

The Rosenberg Unoboxes ME are designed to handle volume flows with low to medium conveying media temperatures. The housing consists of a frame made of an extruded aluminium profile with 2 chambers and plastic edges, as well as double-skinned, 20mm thick panels made of galvanised steel sheet metal with insulation made of non-combustible, sound and heat-insulated glass wool mats. The discharge and the operator side are interchangeable.

Impellers

Backward curved impellers made of high-performance aluminium are used. The impellers together with the impeller hub are dynamically balanced on two levels with the rotor according to quality level G 2,5 / G 6,3 as per DIN ISO 21940-11.

Electrical connection

Connection will be done on the frontal mounted emergency switch.

Direction of rotation

The direction of rotation of the impellers is standard clockwise rotation (seen from the suction side). Counter-clockwise operation will cause overload damage to the motor.

Downloads

Casing

The casing is made of galvanised sheet steel. The 40 mm thick mineral fibre plates inserted act as sound insulation. The cover can be simply screwed off making the fan area easily accessible for cleaning and maintenance. The fan inside can be disassembled.

Impellers

The fans are driven by an external rotor EC motor, fitted in the centrifugal impeller. EC Zeroboxes of type EVOLUTION up to size 250 have a forward curved centrifugal impeller, frome size 315 backward curved centrifugal impellers are used. All sizes of type REVOLUTION have backward curved impellers.

Electrical connection

The electrical connection is made through a terminal box mounted at the housing. The built-in motor protection is signalled via a digital output or a pulse output.

Assembly

Rigid folded spiral-seam tube (Spiro), flexible aluminium or plastic tubes with standardised diameter can be used. Zeroboxes can be used in all mounting positions. When used over several floors of a building, the local fire safety regulations must be observed.

Downloads

Casing

The casing is made of galvanised sheet steel. The 40 mm thick mineral fibre plates inserted in the REVOLUTION Series act as sound insulation. The cover can be simply screwed off, making the fan area easily accessible for cleaning and maintenance. The motor can be disassembled with impeller and spiral casing.

Impellers

External rotor motors are used in protection class IP44/54 with humidity protection, ball bearing-mounted and with built-in thermal contacts for motor protection. In the Evolution version, the impeller is forward curved and has double-sided inlets. The impellers are mounted directly on the rotors of the external rotor motors and are dynamically balanced on two levels with the rotor according to quality level G 2,5 / G 6,3 as per DIN ISO 21940-11.

Electrical connection

The electrical connection is made through a terminal box with protection class IP44.

Assembly

Rigid folded spiral-seam tubes (Spiro), flexible aluminium or plastic tubes with standardised diameter can be used. Zeroboxes can be used in all mounting positions. When used over several floors of a building, the local fire safety regulations must be observed.

Downloads